- Make sure this fits by entering your model number.
- [CAUTIONS] Before purchasing this MAF sensor, Please check the plug fitment notes filter system description for accurate information to confirm compatibility. Replace Part Number: 245-1121 336-60609 336-60558 94859375 2220415010 MAS0191 MAS0190 AF10138 MA1056 AF10137 917-817 245-1122 158-1130 158-1131 245-1121 MA1057 917-818 EMS00051
- [Replacement MAF sensor]: Compatible for 2002-2010 SC430 , 2000-2002 Prizm / Corolla , 2001-2005 GS430
- [High Precision Data]: Please clean out the air box and replace the air filter before installating this MAF sensor, or the Code and Check Engine Light may keep showing even if you replace a new MAF. It can measure the volume and density of air entering the engine, providing highly accurate airflow readings to the ECU over a wide range of ambient temperatures, thereby ensuring efficient engine operation
- [OE Quality]: KAX mass air flow sensor meter is manufactured in accordance with OEM specifications, It is durable, resistant to oxidation and high temperature, ensuring long-term stable performance. Each product must go through multiple inspections and tests before leaving the factory to ensure 100% accurate data transmission to the engine system
- [Replace in Time]: Replacing the MAF sensor can improve fuel efficiency, assist the catalytic converter to better eliminate harmful gases in the vehicle exhaust system, reduce emissions, and prevent premature damage to the catalytic converter. When your vehicle is running with rough idling, stalling, loud noise, and fault lights/code, indicating that your mass air flow sensor needs to be replaced
Product Description
WHY SHOULD YOU REPLACE YOUR MASS AIR FLOW SENSOR?
|
|
|
|
|---|---|---|
Black smoke from exhaust pipe |
Idle speed is unstable |
The engnie will not start |
THE KAX MAF SENSOR CAN ENHANCE YOUR VEHICLE‘S PERFORMANCE
|
|
|
|
|---|---|---|
Protect the catalytic converter |
Improve fuel efficiency and reduce emissions |
Ensure efficient engine operation |
KAX mass airflow sensor installation steps:
1. Turn off the car first, then confirm the installation position of the mass airflow sensor, which is in the tube of the intake pipe, after the air filter element and before the throttle.
2. Reset the ECU data and restore it to the original state. Remove the negative wire of the car battery to ensure that the car circuit is powered off (if there is no sound when pressing the horn of the steering wheel, it proves that the power supply of the car has been disconnected).
3. Replace and install. Remove the screws and plugs of the mass airflow sensor, and remove the faulty mass airflow sensor and replace it with a new one. (Before installation, please check whether the new air flow sensor is leaking or damaged. Make sure that the direction of the air intake on the flow housing is correct before and during installation.)
4. After completing the installation, reconfirm that the mass airflow sensor is not loose and the pipeline is not leaking. Reconnect the negative wire removed before, and confirm that the ECU data has been reset and restored to the original state.
5. Ignition confirmation. Please do not start the vehicle immediately after the installation. Wait for 60 seconds after the vehicle is powered on, and then start the vehicle.
(1) If it is a key-started vehicle, please turn the car key to the "ACC" position. Wait for 60 seconds after the vehicle is powered on, and then start the vehicle;
(2) If it is a one-button start vehicle, please press the one-button start button (without stepping on the brake pedal). Wait 60 seconds, and then step on the brake pedal to start the vehicle.
OE Based Made
100% manufactured in accordance with OE specifications, a direct replacement product for OE, durable, ensuring long-term stable performance, and can achieve OE operation effects. Easy to install with superior performance and reliability
Our Philosophy
KAX offers durable auto parts at a high-quality, along with efficient customer support. We commit to helping more people benefit from high-quality parts, and thus to enjoy a safer driving.
A Professional Choice
KAX professional auto parts are manufactured to meet expectations and needs for fit, form and function, offering high quality and great value.
Full of Confidence
We are a professional auto parts brand, KAX products have been the choice for the engine management sensors and fuel system components needed for your vehicle.
Package Included:
1 X Mass Air Flow Sensor