① Actuator Control :DC Contact point control Power : DC24V (1A) Consumption Power : Approx. 3W (in no-load operation) Standby Power : Approx. 0.25W (in completed) Max. Output torque : 200Kgf‧cm Weight : Approx. 845g Rotation Direction : Closes clock-wise / Opens Counter-clock-wise / (TOP VIEW) Operating time : Approx. 8sec (90° operating basis) Mechanical Life Span : Approx. 100,000 Cycles Operation Environment : indoor IP Rating : IP 67 Certification : CE, RoHS Operation Temperature (Humidity) : room temperature (35 ~ 85% RH) ② Ball valve [Option] Apply to B/V : 32A ~ 50A Ball valve Max. Operating Temp : 0℃ ~ 120℃ (32℉ ~ 248℉) Max. Operating Pressure : 10㎏f/㎝²(142PSI) Application Fluid : Non-Corrosive Liquid amp; Gas※ Be sure to use manual operation only when fully open or fully closed※ Do not connect black and white wires to the red wire Installation Specifications1. Compose system that can control by close-operating Red(DC 24V + conductor), black (DC 0V - conductor) / Open-operating Red (DC 24V + conductor), white (DC 0V - conductor) amp; black (DC 0V - conductor). Do not stick other wires to the red wire (+ pole)2. Install actuator vertically to valve that is established in piping line3. Attach the power supply unit with a switch or disconnecting device for emergency power off4. Connect an overcurrent cut-off device to the power supply for circuit protectionCAU TION1. Be sure to read the product manual enclosed in the product before installation2. Refer to the wiring diagram of the electric actuator for wiring carefully